| Brand |
Part Number |
| Wise Control |
INDUSTRIAL SERVICE PRESSURE GAUGE |
| Model: P252 |
| Code: P2524A3EDJ13330 |
| Range: 0 ̴ 100kPa |
| Eltra encoder |
Model: EH58C1000S5/28P10X3PR |
| S.No: 07/0347/2 |
| |
TEMPSENS MAKE thermocouple WITH weather proof head IP-67, Terminal & ceramic block:- ELEMENT: Cr/Al “K” type, Simplex, Ungrounded, Calibration; ANSI Mc-96.1, Insulation: Mineral Insulated, Dia: 6mm, Sheath: SS-310, T/well: SS-446, Drilled bar stock, ODXWT: 22x6mm, Process Conn. Adj. flange, PCD: 70mm, Length below head: 1000MM |
| (Simplex type MOC : HRS 446 With Sheeth dia 22mm & Thickness 6mm Length : 1000mm Element) |
| Wise Control |
GENERAL SERVICE PRESSURE GAUGE |
| Model: P110 |
| Code: P1101A4CDH04510 |
| Range: 0 ~ 6bar |
| Wise Control Control Vietnam |
| Wise Control |
GENERAL SERVICE PRESSURE GAUGE |
| Model: P110 |
| Code: P1101A4CDH02650 |
| Range: -1bar ~ 0 |
| (P1101A4CDH02610) |
| Wise Control Control Vietnam |
| Wise Control |
DEAD WEIGHT TESTER (CALIBRATION RANGE: 50bar) |
| Model: P910 |
| Range: 0 ~ 50bar |
| (Range: 0-10 bar) |
| Wise Control Control Vietnam |
| Wise Control |
BIMETAL THERMOMETER WITH ANGLE STEM |
| Model: T140 |
| Code: T1403W0ED009950EX |
| STEM LENGTH: 100mm |
| Range: 0 ~ 50'C |
| (T1403W0ED009950) |
| Voith |
Double pump |
| Code: IPV 4/4-13-13-471 |
| Note: we must have the serial numbers of existing pumps as it is a special design |
| (Voith VOITH GEAR PUMP |
| Code: 817010400003 |
| Pump voith 855 IPV3-8-601 |
| Rate: 11.6L/min |
| Max conveying pressure: 330Bar) |
| Voith |
Single pump |
| Code: IPV 3-8-601 |
| (Voith VOITH GEAR PUMP |
| Code: 817010400003 |
| Pump voith 855 IPV3-8-601 |
| Rate: 11.6L/min |
| Max conveying pressure: 330Bar) |
| |
* Confirm series no or nameplate before order! |
| Jenco |
Model: 6308PT |
| DIGITAL pH/TEMPERATURE ANALYZER METER, GRAPHIC |
| DISPLAY, 5-RELAYS, IP-65, RS-485, 4-20mA, 1/4 DIN. |
| Jenco |
Model: IP-600-9TH |
| Jenco |
Dissolved Oxygen |
| Model : 6308DT |
| DO/TEMP METER |
| Jenco |
Model: ID-900-5 |
| Jenco |
Model: ID-900-5/30 |
| Industrial DO Sensor, Epoxy, 10K ATC, 3/4" NPT In-Line, |
| Front & Rear Threads, 30-ft Non-Waterproofed Cable. |
| Tinned Leads |
| * This probe will not work without DO Menbrane Cap(LD-900-3A) |
| (ID-900-5) |
| Jenco |
Model: LD-900-3A |
| Dissolved Oxygen Membrane Kit, contents: |
| * (6) Membrane Cap Assemblies |
| * (1) Bottle 02 Probe Solution |
| * (1) Sanding Disk |
| Finetek |
Replaced by: SE130EGMA0650 |
| (Model: SE130EFMA-24VCD) |
| Wise Control |
PROCESS INDUSTRY PRESSURE GAUGE |
| Model: P253 |
| Code: P2534A3DDB05010 |
| Range: 0 ~ 15kgf/cm2 |
| Wise Control Control Vietnam |
| Wise Control |
PRESSURE INDICATING SWITCH |
| Model: P535 |
| Code: P5354A4DDB05030 |
| SETTING: LATER |
| Range: 0 ~ 15kgf/cm2 |
| Wise Control Control Vietnam |
| Balluff |
Inductive proximity switch |
| Model: BHS001L |
| Type: BES 516-300-S135-S4-D |
| Bei encoder -Crouzet - Crydom -CSTsensor |
P/N: MHM510-PROF-005 |
| / PSS BEI-Ideacod / |
| Replaced by: MHM5-DPC1B-1213C100-H3P |
| (PULSE,INCREMENTAL |
| MHM5-DPB1B-1213-C100-0CC,10-30V,8192 |
| SN:01/08 282209 |
| CODE: BINARY INTERF: PROFIBUS ) |
| Bei encoder -Crouzet - Crydom -CSTsensor |
P/N: MHM510-PROF-005 |
| / PSS BEI-Ideacod / |
| Replaced by: MHM5-DPC1B-1213C100-H3P |
| (PULSE,INCREMENTAL |
| MHM5-DPB1B-1213-C100-0CC,10-30V,8192 |
| SN:01/08 282209 |
| CODE: BINARY INTERF: PROFIBUS ) |
| Bei encoder |
P/N: MHM510-PROF-005 |
| / PSS BEI-Ideacod / |
| Replaced by: MHM5-DPC1B-1213C100-H3P |
| (PULSE,INCREMENTAL |
| MHM5-DPB1B-1213-C100-0CC,10-30V,8192 |
| SN:01/08 282209 |
| CODE: BINARY INTERF: PROFIBUS ) |